|
|
|
楼主 |
发表于 2009-1-9 09:20
|
显示全部楼层
原帖由 kpzzg 于 2009-1-9 06:23 发表 
7兄，我是通达信的，E40是什么，怎么在电脑里显现，求教了！
按CDL1945的说法，E40就是EXPMA40，在143楼有一个公式可以参考。转过来你看一下。你自己取个名字就好。
E40:EXPMA(CLOSE,40);
工作线:=MA(CLOSE,1);
M3:MA(CLOSE,3)COLORRED;
M13:MA(CLOSE,13)COLORGREEN;
收:C,COLORRED,NODRAW;
高:H,NODRAW;
三:C*1.035,NODRAW;
五:C*1.055,NODRAW;
八:C*1.085,NODRAW;
十:C*1.105,NODRAW;
十五:C*1.1548,NODRAW;
廿:C*1.205,NODRAW;
止:C*(1-0.025),NODRAW;
TT2:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4.15),0.9);
TT1:=REF(EMA(TT2,3),1);
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K:=SMA(RSV,3,1);
D:=SMA(K,3,1);
J:=3*K-2*D;
LC:=REF(CLOSE,1);
RSI:=((SMA(MAX((CLOSE - LC),0),3,1) / SMA(ABS((CLOSE - LC)),3,1)) * 100);
FF:=EMA(CLOSE,3);
{稻壳1:EMA(CLOSE,144),POINTDOT,COLORWHITE;}
{稻壳2:EMA(C,318);}
AA1:=AMOUNT/VOL;
BB1:=L<AA1*0.9;
CC1:=(C-REF(C,1))/REF(C,1)*100>1.2;
DD1:=L<MA(C,5)*0.921;
EE1:=VOL<MA(V,5)*1.5;
FF1:=BB1 AND CC1 AND DD1 AND EE1;
F:=100*(C-REF(C,1))/REF(C,1);
P1:=IF(C<REF(O,1) AND F<0,1,0);
P2:=IF(C<REF(O,2) AND F<0,1,0);
TT3:=P1=0 AND REF(P1,1)=1 AND P2=0 AND REF(P2,1)=1 ;
TT4:=P1=1 AND REF(P1,1)=0 AND P2=1 AND REF(P2,1)=0 ;
Z1:=MA(C,13);
ZX:=REF(Z1,13/2+1);
DRAWICON(CROSS(ZX,C),H*1.01,2);
{DRAWTEXT(CROSS(工作线,M13)AND J<55,LOW,'入')COLORWHITE;}
DRAWTEXT(CROSS(CLOSE,TT1)AND J<55,LOW,'买'),COLORRED;
DRAWTEXT(CROSS(88,RSI),HIGH * 1.02,'顶'),COLOR00FFFF;
{DRAWTEXT(FF1,L*0.99,'超短'),COLOR00FF00;}
STICKLINE(TT3,OPEN,CLOSE,3,0),COLORFF00FF;
{STICKLINE(TT4,OPEN,CLOSE,3,0),COLORGREEN;};
用在主图叠加中。 |
|
|
[复制链接]
发表于 2009-1-8 22:02
